begin
     remote = ir.conf
     prog = mplayer
     button = yellow
     config = sub_delay +0.1
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = blue
     config = sub_delay -0.1
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = play
     config = speed_set 1
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = ff
     config = speed_mult 1.33
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = stop
     config = speed_mult 0.67
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = pause
     config = frame_step
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = red
     config = sub_scale +0.1
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = green
     config = sub_scale -0.1
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = left
     config = seek -5
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = vt1
     config = vobsub_lang
     #repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = vt2
     config = sub_visibility
     #repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = vt3
     config = switch_audio
     #repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = right
     config = seek +5
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = vol+
     config = volume 10
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = vol-
     config = volume -10
     repeat = 2
end

begin
     remote = ir.conf
     prog = mplayer
     button = down
     config = seek -30
     repeat = 2
end


begin
     #remote = ir.conf
     prog = mplayer
     button = up
     config = seek +30
     repeat = 2
end
begin
     remote = ir.conf
     prog = mplayer
     button = ch+
     config = seek +300
     repeat = 2
end

begin
     #remote = ir.conf
     prog = mplayer
     button = ch-
     config = seek -300
     repeat = 2
end

begin
	remote = ir.conf
     prog = mplayer
     button = ok
     config = pause
end

begin
	remote = ir.conf
     prog = mplayer
     button = menu
     config = osd
end

begin
	remote = ir.conf
     prog = mplayer
     button = exit
     config = quit
end

##
# xine key bindings.
# Automatically generated by xine-ui version 0.99.5.
##

# start playback
begin
	remote = ir.conf
	button = play
	prog   = xine
	repeat = 0
	config = Play
end

# playback pause toggle
begin
	remote = ir.conf
	button = pause
	prog   = xine
	repeat = 0
	config = Pause
end

# stop playback
begin
	remote = ir.conf
	button = stop
	prog   = xine
	repeat = 0
	config = Stop
end

# take a snapshot
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Snapshot
end

# eject the current medium
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Eject
end

# select and play next MRL in the playlist
begin
	remote = ir.conf
	button = ch+
	prog   = xine
	repeat = 0
	config = NextMrl
end

# select and play previous MRL in the playlist
begin
	remote = ir.conf
	button = ch-
	prog   = xine
	repeat = 0
	config = PriorMrl
end

# loop mode toggle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleLoopMode
end

# stop playback after played stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = PlaylistStop
end

# scan playlist to grab stream infos
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ScanPlaylistInfo
end

# add a mediamark from current playback
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AddMediamark
end

# edit selected mediamark
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = MediamarkEditor
end

# set position to -60 seconds in current stream
begin
	remote = ir.conf
	button = rew
	prog   = xine
	repeat = 1
	config = SeekRelative-60
end

# set position to +60 seconds in current stream
begin
	remote = ir.conf
	button = ff
	prog   = xine
	repeat = 1
	config = SeekRelative+60
end

# set position to -30 seconds in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative-30
end

# set position to +30 seconds in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative+30
end

# set position to -15 seconds in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative-15
end

# set position to +15 seconds in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative+15
end

# set position to -7 seconds in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative-7
end

# set position to +7 seconds in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative+7
end

# set position to beginning of current stream
begin
	remote = ir.conf
	button = ent
	prog   = xine
	repeat = 0
	config = SetPosition0%
end

# set position to 10% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition10%
end

# set position to 20% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition20%
end

# set position to 30% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition30%
end

# set position to 40% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition40%
end

# set position to 50% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition50%
end

# set position to 60% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition60%
end

# set position to 70% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition70%
end

# set position to 80% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition80%
end

# set position to 90% of current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition90%
end

# increment playback speed
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpeedFaster
end

# decrement playback speed
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpeedSlower
end

# reset playback speed
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpeedReset
end

# increment audio volume
begin
	remote = ir.conf
	button = vol+
	prog   = xine
	repeat = 2
	config = Volume+
end

# decrement audio volume
begin
	remote = ir.conf
	button = vol-
	prog   = xine
	repeat = 2
	config = Volume-
end

# increment amplification level
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Amp+
end

# decrement amplification level
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Amp-
end

# reset amplification to default value
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ResetAmp
end

# audio muting toggle
begin
	remote = ir.conf
	button = mute
	prog   = xine
	repeat = 0
	config = Mute
end

# select next audio channel
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AudioChannelNext
end

# select previous audio channel
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AudioChannelPrior
end

# visibility toggle of audio post effect window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = APProcessShow
end

# toggle post effect usage
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = APProcessEnable
end

# select next sub picture (subtitle) channel
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpuNext
end

# select previous sub picture (subtitle) channel
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpuPrior
end

# interlaced mode toggle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleInterleave
end

# cycle aspect ratio values
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleAspectRatio
end

# reduce the output window size by factor 1.2
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = WindowReduce
end

# enlarge the output window size by factor 1.2
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = WindowEnlarge
end

# set video output window to 50%
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Window50
end

# set video output window to 100%
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Window100
end

# set video output window to 200%
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Window200
end

# zoom in
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ZoomIn
end

# zoom out
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ZoomOut
end

# zoom in horizontally
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ZoomInX
end

# zoom out horizontally
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ZoomOutX
end

# zoom in vertically
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ZoomInY
end

# zoom out vertically
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ZoomOutY
end

# reset zooming
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ZoomReset
end

# resize output window to stream size
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Zoom1:1
end

# fullscreen toggle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleFullscreen
end

# Xinerama fullscreen toggle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleXineramaFullscr
end

# jump to media Menu
begin
	remote = ir.conf
	button = menu
	prog   = xine
	repeat = 0
	config = Menu
end

# jump to Title Menu
begin
	remote = ir.conf
	button = av
	prog   = xine
	repeat = 0
	config = TitleMenu
end

# jump to Root Menu
begin
	remote = ir.conf
	button = exit
	prog   = xine
	repeat = 0
	config = RootMenu
end

# jump to Subpicture Menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SubpictureMenu
end

# jump to Audio Menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AudioMenu
end

# jump to Angle Menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AngleMenu
end

# jump to Part Menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = PartMenu
end

# menu navigate up
begin
	remote = ir.conf
	button = up
	prog   = xine
	repeat = 0
	config = EventUp
end

# menu navigate down
begin
	remote = ir.conf
	button = down
	prog   = xine
	repeat = 0
	config = EventDown
end

# menu navigate left
begin
	remote = ir.conf
	button = left
	prog   = xine
	repeat = 0
	config = EventLeft
end

# menu navigate right
begin
	remote = ir.conf
	button = right
	prog   = xine
	repeat = 0
	config = EventRight
end

# menu select
begin
	remote = ir.conf
	button = ok
	prog   = xine
	repeat = 0
	config = EventSelect
end

# jump to next chapter
begin
	remote = ir.conf
	button = ch+
	prog   = xine
	repeat = 0
	config = EventNext
end

# jump to previous chapter
begin
	remote = ir.conf
	button = ch-
	prog   = xine
	repeat = 0
	config = EventPrior
end

# select next angle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = EventAngleNext
end

# select previous angle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = EventAnglePrior
end

# visibility toggle of help window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = HelpShow
end

# visibility toggle of video post effect window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VPProcessShow
end

# toggle post effect usage
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VPProcessEnable
end

# visibility toggle of output window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleWindowVisibility
end

# bordered window toggle of output window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleWindowBorder
end

# visibility toggle of UI windows
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleVisibility
end

# visibility toggle of control window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ControlShow
end

# visibility toggle of mrl browser window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = MrlBrowser
end

# visibility toggle of playlist editor window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = PlaylistEditor
end

# visibility toggle of the setup window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetupShow
end

# visibility toggle of the event sender window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = EventSenderShow
end

# visibility toggle of analog TV window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = TVAnalogShow
end

# visibility toggle of log viewer
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ViewlogShow
end

# visibility toggle of stream info window
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = StreamInfosShow
end

# display stream information using OSD
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = OSDStreamInfos
end

# display information using OSD
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = OSDWriteText
end

# show OSD menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = OSDMenu
end

# enter key binding editor
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = KeyBindingEditor
end

# open file selector
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = FileSelector
end

# select a subtitle file
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SubSelector
end

# download a skin from the skin server
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SkinDownload
end

# display MRL/Ident toggle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = MrlIdentToggle
end

# grab pointer toggle
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = GrabPointer
end

# enter the number 0
begin
	remote = ir.conf
	button = 0
	prog   = xine
	repeat = 0
	config = Number0
end

# enter the number 1
begin
	remote = ir.conf
	button = 1
	prog   = xine
	repeat = 0
	config = Number1
end

# enter the number 2
begin
	remote = ir.conf
	button = 2
	prog   = xine
	repeat = 0
	config = Number2
end

# enter the number 3
begin
	remote = ir.conf
	button = 3
	prog   = xine
	repeat = 0
	config = Number3
end

# enter the number 4
begin
	remote = ir.conf
	button = 4
	prog   = xine
	repeat = 0
	config = Number4
end

# enter the number 5
begin
	remote = ir.conf
	button = 5
	prog   = xine
	repeat = 0
	config = Number5
end

# enter the number 6
begin
	remote = ir.conf
	button = 6
	prog   = xine
	repeat = 0
	config = Number6
end

# enter the number 7
begin
	remote = ir.conf
	button = 7
	prog   = xine
	repeat = 0
	config = Number7
end

# enter the number 8
begin
	remote = ir.conf
	button = 8
	prog   = xine
	repeat = 0
	config = Number8
end

# enter the number 9
begin
	remote = ir.conf
	button = 9
	prog   = xine
	repeat = 0
	config = Number9
end

# add 10 to the next entered number
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = Number10add
end

# set position in current stream to numeric percentage
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SetPosition%
end

# set position forward by numeric argument in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative+
end

# set position back by numeric argument in current stream
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SeekRelative-
end

# change audio video syncing (delay video)
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AudioVideoDecay+
end

# change audio video syncing (delay audio)
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AudioVideoDecay-
end

# reset audio video syncing offset
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = AudioVideoDecayReset
end

# change subtitle syncing (delay video)
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpuVideoDecay+
end

# change subtitle syncing (delay subtitles)
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpuVideoDecay-
end

# reset subtitle syncing offset
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SpuVideoDecayReset
end

# toggle TV modes (on the DXR3)
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ToggleTVmode
end

# switch Monitor to DPMS standby mode
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = DPMSStandby
end

# increase hue by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = HueControl+
end

# decrease hue by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = HueControl-
end

# increase saturation by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SaturationControl+
end

# decrease saturation by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = SaturationControl-
end

# increase brightness by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = BrightnessControl+
end

# decrease brightness by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = BrightnessControl-
end

# increase contrast by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ContrastControl+
end

# decrease contrast by 10
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = ContrastControl-
end

# quit the program
begin
	remote = ir.conf
	button = exit
	prog   = xine
	repeat = 0
	config = Quit
end

# VDR Red button
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRButtonRed
end

# VDR Green button
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRButtonGreen
end

# VDR Yellow button
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRButtonYellow
end

# VDR Blue button
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRButtonBlue
end

# VDR Play
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRPlay
end

# VDR Pause
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRPause
end

# VDR Stop
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRStop
end

# VDR Record
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRRecord
end

# VDR Fast forward
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRFastFwd
end

# VDR Fast rewind
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRFastRew
end

# VDR Power
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRPower
end

# VDR Channel +
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRChannelPlus
end

# VDR Channel -
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRChannelMinus
end

# VDR Schedule menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRSchedule
end

# VDR Channel menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRChannels
end

# VDR Timers menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRTimers
end

# VDR Recordings menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRRecordings
end

# VDR Setup menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRSetup
end

# VDR Command menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRCommands
end

# VDR Command back
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRBack
end

# VDR User command 1
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser1
end

# VDR User command 2
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser2
end

# VDR User command 3
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser3
end

# VDR User command 4
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser4
end

# VDR User command 5
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser5
end

# VDR User command 6
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser6
end

# VDR User command 7
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser7
end

# VDR User command 8
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser8
end

# VDR User command 9
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRUser9
end

# VDR Volume +
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRVolumePlus
end

# VDR Volume -
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRVolumeMinus
end

# VDR Mute audio
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRMute
end

# VDR Audio menu
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRAudio
end

# VDR Command info
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRInfo
end

# VDR Previous channel
begin
	remote = xxxxx
	button = xxxxx
	prog   = xine
	repeat = 0
	config = VDRChannelPrevious
end

##
# End of xine key bindings.
##